Specification first. Product name second.
The table below is a starting point, not a catalogue. What is actually quoted is the grade you write down: assay, impurity ceiling, water content, colour and packing — matched to a plant that can hold that specification across batches.
Core range
Typical presentation below. Assay figures are indicative; the binding figure is fixed in the order confirmation and verified on the pre-shipment certificate of analysis.
| Product | CAS | Typical assay | Packing | Status |
|---|---|---|---|---|
| 1,4-Butanediol (BDO) | 110-63-4 | 99.5% min | 200 kg drum · ISO tank | Open |
| N,N-Dimethylformamide (DMF) | 68-12-2 | 99.9% min | 190 kg drum | Open |
| Tetrahydrofuran (THF) | 109-99-9 | 99.9% min | 180 kg drum | Open |
| N-Methyl-2-pyrrolidone (NMP) | 872-50-4 | 99.5% min | 200 kg drum | Open |
| Propylene glycol, USP / industrial | 57-55-6 | 99.5% min | 215 kg drum | Open |
| Adipic acid | 124-04-9 | 99.7% min | 25 kg bag · 1 000 kg jumbo | Open |
| gamma-Butyrolactone (GBL) | 96-48-0 | 99.5% min | 200 kg drum | Licence only |
| Specialty intermediates | on application | per specification | per specification | On enquiry |
gamma-Butyrolactone is a licence-controlled precursor in several destination markets, including India. It is supplied only to buyers who can evidence an import authorisation before the order is placed, and it is never offered as a substitute for an unlicensed route.
If a CAS number is absent from this table, that is a limit of the published range, not of the supply chain. Send the specification and we will tell you whether the plant base can cover it.
Packing references
What the material actually looks like on despatch: drum, jumbo bag, ISO tank, marks and labels. Plates are filled as each product is photographed on site; a plate without an image has not been shot yet, and we do not use stock photography to fill the gap.
Where the range sits
Solvents
Polar and aprotic solvents for reaction, extraction and coating: DMF, NMP, THF and the glycol ether family.
Intermediates
Diols, diacids and lactones used in polyesters, polyurethanes and pharmaceutical synthesis.
Specialty additives
Adhesion promoters, plasticisers and processing aids, quoted against a specification rather than a catalogue name.
Polymer raw materials
Monomers and chain extenders for coatings, adhesives and elastomers — the core of the Orient Chem Link name.
Sample policy
No production commitment is taken from you before you have held the material and read its certificate. Samples are the cheapest risk control in the trade.
| Item | Terms |
|---|---|
| Quantity | 500 g to 1 kg for solids, 1 L for liquids, or the smallest commercial pack if the product cannot be split. |
| Cost | Sample itself is generally free of charge for standard grades; custom or scarce intermediates are quoted. |
| Freight | Courier and any dangerous-goods handling are at the buyer's cost, billed at cost with the receipt attached. |
| Documents | Every sample travels with its batch COA and MSDS. A sample without a COA is not a sample, it is an ornament. |
| Dispatch | Standard grades leave within 5–7 working days. Custom synthesis is quoted with its own lead time. |
| Retention | A sealed portion of the same batch is retained by both parties, referenced to the sample dispatch note. |
Custom synthesis and toll work
For intermediates that are not off-the-shelf, the route is a quotation against a written specification, not a promise.
What to send
Target structure or CAS, purity and impurity limits, analytical method if you have one, expected annual volume, and the stage of your project.
What comes back
A feasibility note naming one or two plants that have run comparable chemistry, an indicative price band, a lead time, and the analytical method proposed for release.
What we will not do
We do not broker a scanned route document, and we do not place a custom order without a signed specification and a defined release test.
Scale
Gram to multi-tonne. Below pilot scale the economic case usually fails, and we will say so rather than take the fee.
Shipping and terms
| Item | Standard position |
|---|---|
| Incoterms | FOB Shanghai or CIF to Nhava Sheva, Chennai, Mundra, Haiphong, Jakarta or Jebel Ali. Other ports quoted on request. |
| Dangerous goods | UN number, IMDG class and packing group declared on every booking. We will not ship a hazardous product on a general cargo booking to save freight. |
| Packing | UN-certified drums where required, with the certificate referenced on the packing list. |
| Lead time | Spot stock 7–14 days ex-works; production orders typically 20–30 days, stated per order rather than averaged. |
| Payment | Set by the seller of record and confirmed on the order. The desk fee is invoiced separately and is not a credit facility. |
All figures on this page are indicative and subject to confirmation in writing. Nothing here constitutes an offer capable of acceptance.
Send the grade you actually need.
Assay, impurity ceiling, water content, colour, packing and destination port. With those six lines we can quote properly instead of guessing.